The Dynamic Impact Test - AS 5039-2008

This test was introduced to simulate a kick to a security screen door after it was found that grilles fitted to security screen doors were subject to impact breakage through either forward or reverse kicking of the grille panel.

This test is performed with a swinging leather bag filled with sand and lead and weighing between 36 and 46kg. At impact the bag imparts 100 joules of energy to the panel being tested. The test is repeated 5 times, simulating repeated kicking as the burglar attempts to break into your home.

The test panel fails the test if the infill material (mesh) comes out of the door or window framing, or if the impact breaches the material in any way.

Crimsafe® passes because at impact the hooking feature of the patented Screw-ClampTM (which runs along every edge of the product) levers into the aluminium frame and spreads the load right around the perimeter of the product, rather than allowing the force to be concentrated at the point of impact. The mechanical fastening of the clamp to the mesh also resists the tendency of the mesh to be pulled out of the frame. These features permit Crimsafe to withstand enormous force.

To test a sample of Crimsafe enter your postcode above to contact a Crimsafe Licensee. With their blessing you can attempt to cut, bend, break or kick the product until you're 100% convinced that it offers something special.